Filter
Top Products
20 HP Software Solutions Summary
EN
Selecting a Zone
The HP LaserJet Utility allows you to select a preferred zone for
your printer on a Phase 2 EtherTalk network. Instead of your
printer remaining on the default zone, which is set by the router,
this utility lets you select the zone on which your printer appears.
The zones on which your printer can reside are limited by your
network configuration. The HP LaserJet Utility only enables
you to select a zone that is already configured for your
network.
Zones are groups of computers, printers, and other AppleTalk
devices. They can be grouped by physical location (for example,
Zone A may contain all the printers on the network in building A).
They may also be grouped logically (for example, all printers used
in the finance department).
If you are using LocalTalk, skip this section, select Quit from the
File
menu, then go to “Selecting Your Printer.”
1. Select the Settings icon from the scrolling icon list. The
Please
Select a Setting:
dialog box appears.
2. Select Printer Zone in the list and click Edit. The
Select a Zone
dialog box appears.
3. Select your preferred network zone from the
Select a Zone:
list
and click Set Zone.
4. To exit, select Quit from the
File
menu.
Notify everyone on your network of the new zone for your printer
so they can select the printer in the Chooser.