Filter
Top Products
COPCOM278E The system cannot find the VALUE_0
storage manager.
Explanation: No additional information is available
for this message.
COPCOM279E The active zone set already exists in
the VALUE_0 storage area network
fabric.
Explanation: No additional information is available
for this message.
COPCOM281E The start port number VALUE_0 of
the fibre channel switch is greater than
the end port number VALUE_1.
Explanation: No additional information is available
for this message.
COPCOM282E Port VALUE_0 is already connected to
port VALUE_1.
Explanation: No additional information is available
for this message.
COPCOM283E The system cannot find the VALUE_0
file system mount.
Explanation: No additional information is available
for this message.
COPCOM284E The system cannot find the
endstation endpoint VALUE_0.
Explanation: No additional information is available
for this message.
COPCOM286E The VLAN with VALUE_0 : VALUE_1
does not exist on switch VALUE_2.
Explanation: No additional information is available
for this message.
COPCOM287E The parent with the ID VALUE_0 that
is provided for the DCM insert is not
valid.
Explanation: No additional information is available
for this message.
COPCOM289E The system cannot find the VALUE_0
storage pool template.
Explanation: No additional information is available
for this message.
COPCOM290E The system cannot find the VALUE_0
storage subsystem template.
Explanation: No additional information is available
for this message.
COPCOM291E The system cannot find the VALUE_0
storage fibre adapter template.
Explanation: No additional information is available
for this message.
COPCOM292E The system cannot find the VALUE_0
storage host bus adapter template.
Explanation: No additional information is available
for this message.
COPCOM293E The system cannot find the VALUE_0
storage manager template.
Explanation: No additional information is available
for this message.
COPCOM294E The system cannot find the VALUE_0
direct access storage device template.
Explanation: No additional information is available
for this message.
COPCOM295E The system cannot delete the data
center fragment VALUE_0 because it is
used by at least one network topology
template.
Explanation: No additional information is available
for this message.
COPCOM296E The system cannot delete the
network topology template VALUE_0
because it is used by at least one
application deployment template.
Explanation: No additional information is available
for this message.
COPCOM297E The system cannot delete the logical
deployment template VALUE_0 because
it is used by at least one application
deployment template.
Explanation: No additional information is available
for this message.
COPCOM298E The system cannot perform delete
operation. Remove all dependencies and
then try again.
Explanation: No additional information is available
for this message.
110 Tivoli Intelligent Orchestrator Problem Determination and Troubleshooting Guide