Filter
Top Products
(and usually happens when the user is updating some
data). The most likely reason for it is a constraint
violation or a miscellaneous database error. Inspecting
the logs should help to localize the problem.
COPJEE080E A record with this name already exists.
A record name must be unique.
Explanation: No additional information is available
for this message.
COPJEE081E The system was unable to invoke EJB.
Ask your system administrator if the
EJB server is available.
Explanation: No additional information is available
for this message.
COPJEE082E The system cannot load datasource
"VALUE_0".
Explanation: A database connection problem is the
most frequent cause of this failure. Ask your system
administrator to correct the database connection
problem and then restart the user interface.
COPJEE084E The system will not swap positions on
the software stack because it has
identified an incorrect position. Type a
position value that is greater than or
equal to zero.
Explanation: No additional information is available
for this message.
COPJEE085E The system will not be moved to a
VLAN because the system cannot find
managed system VALUE_0(VALUE_1).
Explanation: No additional information is available
for this message.
COPJEE086E A monitoring configuration was not
selected.
Explanation: A monitoring configuration must be
selected before it can be associated with the current
resource.
Operator response: Create at least one or more
monitoring configurations.
COPJEE089E The managed system VALUE_1 of type
"VALUE_0" is connected to VALUE_2
switch ports. Use the icon view to
precisely specify the port that will be
moved to a new VLAN.
Explanation: No additional information is available
for this message.
COPJEE090E The VALUE_0 "VALUE_1" is not
connected to any switch ports.
Explanation: No additional information is available
for this message.
COPJEE092E The system cannot save a service access
point. An access point of type
"VALUE_0" is already defined for port
VALUE_1.
Explanation: No additional information is available
for this message.
COPJEE093E The specified position is already
occupied.
Explanation: No additional information is available
for this message.
COPJEE094E The device driver and the monitoring
application are already associated with
this resource.
Explanation: The list of associated monitoring
configurations already contains a monitoring
configuration with the same device driver and
monitoring application for this resource.
Operator response: If the monitoring configuration
selected is correct, then nothing more is needed.
Otherwise, add an association with the desired
monitoring configuration.
COPJEE095E The requested end time VALUE_0 is
earlier than or the same as the start time
VALUE_1.
Explanation: No additional information is available
for this message.
COPJEE096E The system cannot delete a blade
chassis when one or more servers are
installed in the chassis. Remove all
servers from the blade chassis and then
try again to delete it.
Explanation: No additional information is available
for this message.
COPJEE100E The system cannot connect the NIC to
port VALUE_0 because the port is being
used by another device.
Explanation: No additional information is available
for this message.
140 Tivoli Intelligent Orchestrator Problem Determination and Troubleshooting Guide