Filter
Top Products
Explanation: No additional information is available
for this message.
COPNET014E The system cannot find VLAN:
VALUE_0.
Explanation: No additional information is available
for this message.
COPNET015E The switch endpoint mode VALUE_0 is
not valid.
Explanation: No additional information is available
for this message.
COPNET016E The switch endpoint encapsulation
VALUE_0 is not valid.
Explanation: No additional information is available
for this message.
COPNET017E There is no association between the
"VALUE_0" MPLS tunnel and the
"VALUE_1" MPLS path.
Explanation: No additional information is available
for this message.
COPNET018E The switch port "VALUE_0" is already
connected.
Explanation: No additional information is available
for this message.
COPNET019E The system cannot find the load
balancer: VALUE_0.
Explanation: No additional information is available
for this message.
COPNET020E The system cannot find the route:
VALUE_0.
Explanation: No additional information is available
for this message.
COPNET021E The system cannot find real IP:
VALUE_0.
Explanation: No additional information is available
for this message.
COPNET022E The system cannot find the load
balancer type: VALUE_0.
Explanation: No additional information is available
for this message.
COPNET023E The system cannot find the VALUE_0
router.
Explanation: No additional information is available
for this message.
COPNET024E The system cannot find the VALUE_0
access control list.
Explanation: No additional information is available
for this message.
COPNET025 The system cannot find the address
space VALUE_0.
Operator response: Define the address space.
COPNET026E The system cannot find the VALUE_0
access rule.
Explanation: No additional information is available
for this message.
COPNET027E The system cannot find the dynamic
IP address range VALUE_0.
Explanation: No additional information is available
for this message.
COPNET028E Invalid subnetwork netmask:
VALUE_0. A netmask must be in IP
format (nnn.nnn.nnn.nnn) or netmask
length format (a number between 1 and
32).
Explanation: No additional information is available
for this message.
COPNET029E Invalid VLAN number: VALUE_0. The
VLAN number must be between 1 and
4095.
Explanation: No additional information is available
for this message.
170 Tivoli Intelligent Orchestrator Problem Determination and Troubleshooting Guide