Filter
Top Products
AGILE 5250 ALLY Users Guide and ReferencePage 4-16
If the printer is capable of printing any font at any pitch (CPI), then this
PFS should set the pitch for the current font. If a specific font is needed to
achieve 10 CPI, then this PFS should be defined to select that font.
If Option 4F CPI/Font Order is set to 00 (!AGILE!4F=00;), then this
PFS will be sent before the GFID for the font is sent. If Option 4F CPI/
Font Order is set to 01 (!AGILE!4F=01;), then this PFS will be sent after
the GFID for the font is sent.
1B L PSCPI
Print with proportional spacing in landscape orientation. This PFS is sent
to the printer when the 5250 ALLYs page orientation algorithm has
selected a landscape orientation, and when the System has requested
proportional spacing (using either an SCS Set Character Density command
or an SCS Set FID through GFID command).
If the printer is capable of printing any font with proportional spacing, then
this PFS should set proportional spacing for the current font. If a specific
font is needed to achieve proportional spacing, then this PFS should be
defined to select that font.
If Option 4F CPI/Font Order is set to 00 (!AGILE!4F=00;), then this
PFS will be sent before the GFID for the font is sent. If Option 4F CPI/
Font Order is set to 01 (!AGILE!4F=01;), then this PFS will be sent after
the GFID for the font is sent.
1C L 12CPI
Print 12 characters per inch in landscape orientation. This PFS is sent to
the printer when the 5250 ALLYs page orientation algorithm has selected
a landscape orientation, and when the System has requested a font with a
pitch of greater than 10 but less than or equal to 12 CPI (using either an
SCS Set Character Density command or an SCS Set FID through GFID
command).
If the printer is capable of printing any font at any pitch (CPI), then this
PFS should set the pitch for the current font. If a specific font is needed to
achieve 12 CPI, then this PFS should be defined to select that font.
If Option 4F CPI/Font Order is set to 00 (!AGILE!4F=00;), then this
PFS will be sent before the GFID for the font is sent. If Option 4F CPI/
Font Order is set to 01 (!AGILE!4F=01;), then this PFS will be sent after
the GFID for the font is sent.