Filter
Top Products
AGILE 5250 ALLY Users Guide and ReferencePage 1-22
2. ASCII to EBCDIC
3. EBCDIC to EBCDIC
4. EBCDIC to HP LaserJet (Roman 8 extended ASCII)
5. EBCDIC to PC (standard PC extended ASCII character set)
6. EBCDIC to PostScript (IsoLatin1 extended ASCII character set)
7. Xerox 275 protocol converter EBCDIC to ASCII
8. User Table 1
9. User Table 2
A.User Table 3
B.User Table 4
C.User Table 5
D.User Table 6
E.User Table 7
F.Xerox EBCDIC Font Download to ASCII (default for fonts)
To change the translation table selection, press the MODE button on the
5250 ALLY front panel until the LED reads 8. After two seconds, the
LED will display an underscore (_). Then press the MODE button until the
LED displays the number of the data type to be translated (0, 3, 6, 7).
After the data type has been selected, the LED will display an equals sign
(=). The user must then press the MODE button until the number of the
appropriate translation table for the data type is displayed (0-F.)
After two seconds, the translation table selection for the selected data type
will change, and the unit will return to Normal Operating Mode. This
process must be repeated for each data type that the user would like routed
through a different translation table.
Note: The translation table selection is loaded as part of the output port
configuration. Loading an output port configuration will overwrite this
selection. As such, changes to this selection must be made after loading the
output port configuration.