Filter
Top Products
Page 5-7CHAPTER 5 MAINTENANCE & TROUBLESHOOTING
Configuration Report (Mode 9-1)
This two-page report lists each 5250 ALLY configuration option setting,
with the exception of the translation tables, PFS definitions and GFIDs.
The following is a sample Configuration Report:
-----------------------------------------------------------------------------
AGILE 5250 ALLY V1.00 COPYRIGHT (C) 09/01/95 BY AGILE. ALL RIGHTS RESERVED.
Configuration Report - Page 1 of 2
-----------------------------------------------------------------------------
TWINAX (GROUP 00)
01 - Address - 1
02 - Emulate - 5219
03 - Mode - IBM
05 - Timeout - 5 second(s)
0600 - Xerox UDK Translation - UDK translation
0601 - Xerox PFS Suppression - Automatic PFS suppression
0602 - Xerox Form Feed Suppression - Automatic form feed suppression
0603 - Xerox Form Feed to New Line - Inactive
0604 - Xerox Logical Not - Use logical not commands
0605 - Xerox Job Restart to Form Feed - Inactive
0606 - Xerox Metacode Transparency - Inactive
ALTERNATE HOST (GROUP 30)
31 - Mode - Transparent mode
33 - Timeout - 5 second(s)
3400 - Xerox UDK Translation - UDK translation
3401 - Xerox PFS Suppression - Automatic PFS suppression
3402 - Xerox Form Feed Suppression - Automatic form feed suppression
3403 - Xerox Form Feed to New Line - Inactive
3404 - Xerox Logical Not - Use logical not commands
3405 - Xerox Job Restart to Form Feed - Inactive
3406 - Xerox Metacode Transparency - Inactive
PRINTER (GROUP 40-50)
40 - Load - Generic printer
42 - Timing - Fast
43 - Error Timeout - 5 second(s)
44 - Carriage Return at Form Feed - Add CR at FF
46 - Vertical Movement - Relative vertical movement
47 - Horizontal Resolution - 180 DPI
48 - Vertical Resolution - 6 LPI
49 - Maximum Vertical Resolution - 1 line
4A - Horizontal Offset - 0.00 inch
4B - Vertical Offset - 0.00 inch
4C - COR Horizontal Offset - 0.50 inch
4D - COR Vertical Offset - 0.50 inch
4E - COR Vertical Reduction - 70%
4F - CPI/Font Order - CPI-Font
51 - Bolding - Printer
52 - Page Resetting - No reset
53 - Underlining - Underline PFS
54 - Orientation - Force portrait
-----------------------------------------------------------------------------