Filter
Top Products
AGILE 5250 ALLY Users Guide and ReferencePage A-16
Suppress Form Feeds in form-based jobs: This option is similar to the Auto
Form Feed suppression option, except that the 5250 ALLY starts
suppression only for form-based jobs. Form-based jobs are started with
s+Md and s+Nd. The Form Feed suppression mode is
terminated with the job reset command: s+Xd. This setting is useful
only for XDPM data streams.
Suppress Form Feeds: This option causes the 5250 ALLY to suppress all
Form Feeds for data received from the twinax address. If the user sets this
option, the only way to get a Form Feed to the printer is to change a
character translation table to translate a printable EBCDIC character into
the Form Feed character. This setting is useful in both XDPM and XPPM
mode, but it is rarely used.
To program this option:
!AGILE!0602=00; Do not suppress FFs
!AGILE!0602=01; Auto FF suppression (default)
!AGILE!0602=02; Suppress FFs in form-based jobs
!AGILE!0602=03; Suppress FFs
For more information on Form Feed suppression, see the previous sections
of this appendix, Auto PFS Suppression and Auto Form Feed Suppression.
0603 Change Form Feed to New Line
If Form Feed suppression is occurring, activating this feature will change
all Form Feed requests into New Lines (CR/LF).
To program this option:
!AGILE!0603=00; Do not change FF to NL (default)
!AGILE!0603=01; Change FF to NL
0604 Logical Not Commands
This option is useful for both XDPM and XPPM data streams; however it
is rarely used for XPPM. This option controls how the 5250 ALLY uses
Logical Not commands (¬).
Ignore Logical Not commands: This option specifies that Logical Not
commands in the data stream are to be ignored, i.e., treated as printable
text. This mode is very useful in debugging data streams that use Logical
Not commands.