Filter
Top Products
AGILE 5250 ALLY Users Guide and ReferencePage B-4
Command: Superscript (SPS)
Format: 09
Printers: 3812, 5219
Action: Causes the current print position to move up one-half
line distance.
On the 5219, only one level of superscript is supported.
On the 3812, multiple levels of superscript are supported.
IBMEMUL: Same as the 3812. PFS 2D SUPS ON is sent to the
printer once for each superscript level. A superscript
command received after a subscript command (to restore
the normal baseline position) causes PFS 2E
SUPSOFF to be sent to the printer once per level.
The use of Subscript On/Off and Superscript On/Off
printer commands in PFSs 2D SUPS ON, PFS 2E
SUPSOFF, PFS 2B SUBS ON and PFS 2C
SUBSOFF, respectively, will allow only one level of sub/
superscripting, because the target printer is performing
the sub/superscript, and it will support only a single
level.
The use of relative upward/downward movement
commands for PFSs 2D SUPS ON, PFS 2E
SUPSOFF, PFS 2B SUBS ON and PFS 2C
SUBSOFF, respectively, will allow multiple sub/
superscript levels to be supported.
275EMUL: No operation.
Command: Repeat (RPT)
Format: 0A
Printers: 3812, 5219
Action: No operation is performed; no character is printed.
IBMEMUL: No operation.
275EMUL: No operation.