Inter-Tel CS-5400 Server User Manual


 
System Features
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 August 2005
Exiting and Re-Entering the Conference
Page 205
Exiting and Re-Entering the Conference
To exit the conference and leave the other parties connected (any inside party) with an
Inter-Tel endpoint:
During the conference, press the button and hang up. The button and a Call
button flutters.
To return to the conference:
Lift the handset and/or press the button again.
To exit the conference and leave the other parties connected (any inside party) with a sin-
gle line endpoint:
During the conference, hookflash and hang up.
To return to the conference: Lift the handset and/or enter the Conference feature
code (5).
Ending the Conference and Placing All Parties on Hold
To end the conference and put all parties on hold (any inside party) with an Inter-Tel
endpoint:
During the conference, press the button and hang up. The button and a
Call button flutters. The parties are still connected in a conference.
To place the parties on individual hold: Press the Hold button or enter the Individual
Hold feature code (336). You can then return to each party individually by pressing the
associated Call or button.
To end the conference and put all parties on hold (any inside party) with a single line end-
point:
During the conference, hookflash and hang up. The parties are still connected in a con-
ference.
To place the parties on individual hold: Lift the handset and enter the Individual
Hold feature code (336). You can then return to each party individually by entering the
Individual Hold feature code again.
NOTE
If all remaining parties are outside parties and the Hold timer expires while you
are out of the conference, the conference recalls your endpoint. The recall rings
at your endpoint and the button flashes at the medium rate. The display
shows CONFERENCE RECALLING. Press the button to return to the
conference. If the recall is not answered before the Recall timer expires, it will
recall the Attendant.
NOTE
If the Hold timer expires while you are out of the conference, the parties recall
your endpoint. When the recall rings at your endpoint, lift the handset to answer
the recall. If the recall is not answered before the Recall timer expires, it will recall
the Attendant.
CNF CNF
CNF
CNF
CNF
CNF CNF
IC