Filter
Top Products
The limits for the Tear-off Position Adjustment from the default
position is ±19.05 mm (0.75 in.).
Note: If the last page of the form feeds past the forms sensor,
the printer displays
and pressing Load/Eject ejects the paper.
To remove the form, follow these steps:
1. Tear off the paper toward the front of the printer.
2. Press Load/Eject to position the next form back to the top of
form position.
The Ready indicator comes on, and you are ready to print the
next print job.
1 END OF FORMS
LOAD FORMS
1-80 User’s Guide