Filter
Top Products
2. Unlock the blue locking lever and move the right roller
assembly to the extreme right.
Blue Locking Lever
Right Roller Assembly
Bottom of Forms Device
Blue Sliding Guide
3. Hold the device at the top with the F3 in the upper left corner
facing you. The finger grips should be at the bottom and should
enter the printer first. Lower the device into the printer behind
the platen rod and align the ends of the device with the slots in
the frame. Continue to lower the device until the ends of the
device rest in the slots of the frame.
End of
Device
End of
Device
Slot in
Frame
Slot in
Frame
Top of
Forms
Device
Platen Rod
Chapter 1. Setting Up the 4230 Printer 1-89