Filter
Top Products
Auto Sheet Feeder (F4):
1. Press Stop.
2. Place paper in the manual bin.
3. Press Load.
4. Press Start.
Continuous Forms Device (F1) and Dual Purpose Forms Device
(F2):
1. Press Stop.
2. Load forms.
3. Be sure that the forms are loaded correctly and that they are
under the blue forms guide/forms sensor.
4. Be sure that nothing blocks the blue forms guide/forms
sensor.
5. Reset the top of form position.
6. Press Start.
7. Verify the printed output; if data loss is suspected, follow local
operating procedures.
Document Insertion Device (F3):
1. Press Stop.
2. Press Load/Eject.
3. Load the correct form size, or
4. Check the maximum page length setting and correct it; then
reload the form and restart the print job (see “Introducing the
4230 Printer” in IBM 4230 Printer Models 102, 1I1, 202, 2I1, 4I3,
3 LOAD MANUAL BIN TIMEOUT
LOAD BIN
31 END OF FORMS TIMEOUT
LOAD FORMS/BIN
B-16 User’s Guide