Filter
Top Products
7. For Models 102 and 1I1: Align the two pins and the key slots in
the V-connector with the two holes and the key in the cable
connector on the bezel. Plug in the connector. Turn the
connector clockwise until it locks into place.
| 8. For Model 4I3: Insert the cable connector into the printer
| connector on the bezel. Make sure the cable connector is
| securely seated into place. Push and fasten the top and bottom
| clips onto the cable connector.
Cable Connector
Bezel
Models 4I3
Models 102 and 1I1
2-8 User’s Guide