6. Show the operator how to load forms with emphasis on:
Continuous Forms Device (F1):
a. Location and function of the blue tractor locking lever and
adjustment for width of form
b. Forms tensioner location and location of forms tension knob
and adjustment
c. Platen rod location and use as a reference
d. Top of form and left margin alignment
e. Forms movement keys
f. Unloading forms, with emphasis on unloading from top of
printer.
See “Installing and Using the Continuous Forms Device (F1)” on
page 1-21 for more information.
Dual Purpose Forms Device (F2):
a. Location and function of tear bar
b. Location of blue tractor locking lever and adjustment for
width of form
c. Platen rod location and use as a reference
d. Auto load feature demonstration
e. Top of form and left margin alignment
f. Forms movement keys
g. Readying the printer for the next transaction, with emphasis
on the proper method for setting the tear off position and for
tearing off the form at the tear bar toward the front of the
printer
h. Unloading forms, with emphasis on removing forms from the
bottom of the printer.
See “Installing and Using the Dual Purpose Forms Device (F2)”
on page 1-55 for more information.
A-4 User’s Guide