| Attaching the Cable to Your Computer
If you are attaching the printer to an IBM AS/400 and have
connected the signal cable to your computer, go to “Connecting Your
Printer to an IBM AS/400” on page 2-12 for information about
configuring your system. If you are attaching your printer to an IBM
System/36, go to “Connecting Your Printer to an IBM System/36” on
page 2-15.
For all other computers, see the appropriate instructions included
with your computer for attaching the other end of the signal cable to
your computer.
Chapter 2. Attaching the 4230 Printer to Your Computer 2-11