Lexmark 102 Printer User Manual


 
This is an informational message. The printer displays this message
after you press Cancel Print.
Press Start to cancel the current print job or press Cancel Print
again (before pressing Start) to return the printer to ready. (The
print job will not be canceled.)
This is an informational message. The printer displays this message
after the Buffer Reprint Code is sent and accepted (see Setting
Send Buffer Reprint Code in IBM 4230 Printer Models 102, 1I1, 202,
2I1, 4I3, and 5I3 Operator Panel Instructions).
Press Start. The buffer reprints. The message will change after the
buffer has finished reprinting.
These are informational messages. The printer displays these
messages after you press PA1 or PA2.
Press Start. The status code disappears when the controller
accepts the input.
59 CANCEL PRINT ACTIVE
6 BUFFER REPRINT ACTIVE
61 PA1 SELECTED
62 PA2 SELECTED
Appendix B. Problems B-21