Lexmark 102 Printer User Manual


 
1. Press Stop.
2. Press Start.
There has been a probable loss of data. To recover:
1. Press Cancel Print.
2. Press Start.
3. Resubmit your print job.
1. Turn the power Off (O).
2. Wait 10 seconds, then turn the power On (|).
3. If the power-on test is successful, resubmit the print job.
4. If the printer displays this status code again, call for service.
68 DATA CLEARED
PRESS STOP THEN START
69 DATA LOST
PRESS CANCEL PRINT
72 PRINTER BOARD FAILURE
SEE USER'S GUIDE
74 PRINTER BOARD FAILURE
SEE USER'S GUIDE
75 PRINTER BOARD FAILURE
SEE USER'S GUIDE
76 PRINTER BOARD FAILURE
SEE USER'S GUIDE
Appendix B. Problems B-23