Lexmark 102 Printer User Manual


 
Left Margin
Left Margin
Right Margin
Right Margin
Correct
Incorrect
4. Lock the tractor.
Adjusting the Forms Thickness Setting
To adjust the lightness or darkness of the print, you must increase or
decrease the gap between the print head and the platen rod. This
distance is automatically set for you by the Automatic Forms
Thickness Adjustment (AFTA), but you can make corrections to the
distance if the print output is not as you desire. It is up to you to
decide if the print is dark (or light) enough to meet your
requirements.
To adjust the forms thickness setting with the F1 forms device, follow
these steps:
1. The forms thickness setting must be adjusted when the printer is
printing or has printed and is ready. Press Start, if needed, to
have the printer display
2. To make the print darker, press Darker.
The printer displays
The print head moves closer to the paper, and the print becomes
darker.
READY <A>
LIGHT | -------| DARK
1-40 Users Guide