Lexmark 102 Printer User Manual


 
This message is displayed when a HOST timeout occurs while a
Dual Purpose (F2) forms device is in use and the paper has been
ejected.
1. Turn the power Off (O).
2. Wait 10 seconds, then turn the power On (|).
3. If the printer displays this status code again, call for service.
1. Install a new ribbon.
2. Turn the power Off (O).
3. Wait 10 seconds, then turn the power On (|).
4. If the printer displays this status code again, call for service.
98 HOLD PRINT TIMEOUT
PRESS LOAD
A1 MACHINE CHECK
SEE USER'S GUIDE
A2 MACHINE CHECK
SEE USER'S GUIDE
A3 MACHINE CHECK
SEE USER'S GUIDE
A4 MACHINE CHECK
SEE USER'S GUIDE
Appendix B. Problems B-27