Mitsubishi Electronics Q64TCRTN Network Card User Manual


 
235
CHAPTER 4 FUNCTIONS
4
4.19 Peak Current Suppression Function
(2) Examples of dividing timing
(a) Four timing
The following table shows two examples.
The following shows the relationship between groups and the values (%) of CH Upper limit output limiter
(Un\G42, Un\G74, Un\G106, Un\G138).
In Example 2, the maximum number of groups is four; therefore, timing is divided into four timing. Because no
channel is set for Group 3, no channel starts transistor output at the timing for Group 3.
Example Channel Group
Example 1
CH1 Group 1
CH2 Group 2
CH3 Group 3
CH4 Group 4
Example 2
CH1 Group 1
CH2 Group 2
CH3 Not divided
CH4 Group 4
Peak current suppression control group setting (Un\G784)
Example 1
4321
0100 0011 0010 0001
Group 1 Group 2 Group 3 Group 4
25% 25% 25% 25%
CH1
Divided into
4 groups
CH2 CH3 CH4
Group 1 Group 2 Group 3 Group 4
25% 25% 25% 25%
CH1
Divided into
4 groups
CH2
100% (In case of default value applied)
CH3
CH4
CH4 CH3 CH2 CH1
H
Example 2
4021
0100 0000 0010 0001
CH4 CH3 CH2 CH1
H
Whether the transistor output is executed or not
can be selected by CH3 Unused channel setting (Un\G125).
Page 126, Section 3.4.2 (35)