Filter
Top Products
356
(c) Program example
Write the program to the CPU module on the master station.
• Program that checks the operation status of the remote I/O station
*1 Add the following MCR instruction to the end of the program.
• Program that changes the setting/operation mode
• Initial setting program
Check the baton pass status of
the master station.
Check the data link status of
the master station.
Check the baton pass status of
the remote I/O station.
Check the cyclic transmission status
of the remote I/O station.
Check the parameter communication
status of the remote I/O station.
Check the status of
the master module.*
1
Change to the setting mode or
operation mode.
CH2 to 4 Unused channel
setting: Unused
Flag 0 for setting value write: ON
Flag 1 for setting value write: ON