NETGEAR L3 Switch User Manual


 
7000 Series L3 Managed Switch Reference Manual for Software v2.0
Switching Commands 7-49
If all is selected, all ports will be removed from the destination port filter set.
Format config macfilter deldest <macaddr> <vlan>
<slot.port|all>
Spanning Tree Commands
This section provides detailed explanation of the spanning tree commands. The commands are
divided into two functional groups:
Show commands display spanning tree settings, statistics, and other information.
Config commands configure features and options of the switch. For every config command
there is a show command that displays the config setting.
This section is organized by configuration type:
System information and statistics commands
Bridge and CIST commands
MSTI commands
Modified commands
Obsolete commands
show spanningtree summary
This command displays spanning tree settings and parameters for the switch.
Format show spanningtree summary
Spanning Tree Adminmode Enabled or disabled.
Spanning Tree Version Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w,
or IEEE 802.1d) based upon the Force Protocol Version
parameter
Configuration Name Configured name.
Configuration Revision
Level Configured value.
Configuration Digest Key Calculated value.
Configuration Format
Selector
Configured value.