Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
7-14 Switching Commands
Task Id The task ID of the event.
Code The event code.
Time The time this event occurred.
Note: Event log information is retained across a switch reset.
show msglog
This command displays the message log maintained by the switch. The message log contains
system trace information.
The trap log contains a maximum of 256 entries that wrap.
Format show msglog
Message The message that has been logged.
Note: Message log information is not retained across a switch reset.
show traplog
This command displays the trap log maintained by the switch.
The trap log contains a maximum of 256 entries that wrap.
Format show traplog
Number of Traps since
last reset
The number of traps that have occurred since the last reset of this
device.
Number of Traps since log
last displayed
The number of traps that have occurred since the traps were last
displayed. Getting the traps by any method (terminal interface
display, Web display, upload file from switch etc.) will result in
this counter being cleared to 0.
Log The sequence number of this trap.
System Up Time The relative time since the last reboot of the switch at which this
trap occurred.
Trap The relevant information of this trap.
Note: Trap log information is not retained across a switch reset.