Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
8-6 Routing Commands
Format show ip summary
Default Time to Live The computed TTL (Time to Live) of forwarding a packet from
the local router to the final destination.
Router ID Is a 32 bit integer in dotted decimal format identifying the router,
about which information is displayed. This is a configured value.
Routing Mode Shows whether the routing mode is enabled or disabled.
IP Forwarding Mode Shows whether forwarding of IP frames is enabled or disabled.
This is a configured value.
config ip forwarding
This command enables or disables forwarding of IP frames.
Default enable
Format config ip forwarding <enable|disable>
show ip stats
This command displays IP statistical information. Refer to RFC 1213 for more information about
the fields that are displayed. This command takes no options.
Format show ip stats
config routing
This command enables or disables the IP Router Admin Mode for the master switch.
Format config routing <enable|disable>
show ip vlan
This command displays the VLAN routing information for all VLANs with routing enabled in the
system.
Format show ip vlan
MAC Address used by
Routing VLANs
Is the MAC Address associated with the internal bridge-router
interface (IBRI). The same MAC Address is used by all VLAN