Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
9-32 CLI Commands: Differentiated Services
Mark IP DSCP Denotes the mark/re-mark value used as the DSCP for traffic
matching this class. This is not displayed if the config diffserv
policy mark ipdscp command was not specified, or if policing is
in use for the class under this policy.
Mark IP Precedence Denotes the mark/re-mark value used as the IP Precedence for
traffic matching this class. This is not displayed if the config diff-
serv policy mark ipprecedence command was not specified, or if
either mark DSCP or policing is in use for the class under this
policy.
Policing Style This field denotes the style of policing, if any, used (simple, sin-
gle rate, or two rate).
Committed Rate (Kbps) This field displays the committed rate, used in simple policing,
single-rate policing, and two-rate policing.
Committed Burst Size (KB) This field displays the committed burst size, used in simple polic-
ing, single-rate policing, and two-rate policing.
Excess Burst Size (KB) This field displays the excess burst size, used in single-rate polic-
ing.
Peak Rate (Kbps) This field displays the peak rate, used in two-rate policing.
Peak Burst Size (KB) This field displays the peak burst size, used in two-rate policing.
Conform Action The current setting for the action taken on a packet considered to
conform to the policing parameters. This is not displayed if polic-
ing is not in use for the class under this policy.
Conform DSCP Value This field shows the DSCP mark value if the conform action is
markdscp.
Conform IP
Precedence Value This field shows the IP Precedence mark value if the conform
action is markprec.
Exceed Action The current setting for the action taken on a packet considered to
exceed to the policing parameters. This is not displayed if polic-
ing not in use for the class under this policy.
Exceed DSCP Value This field shows the DSCP mark value if this action is markdscp.
Exceed IP
Precedence Value This field shows the IP Precedence mark value if this action is
markprec.
Non-Conform Action The current setting for the action taken on a packet considered to
not conform to the policing parameters. This is not displayed if
policing not in use for the class under this policy.
Non-Conform DSCP Value This field displays the DSCP mark value if this action is markd-
scp.