Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
Routing Commands 8-17
config router ospf area stub create
This command creates a stub area for the specified area ID. A stub area is characterized by the fact
that AS External LSAs are not propagated into the area. Removing AS External LSAs and
Summary LSAs can significantly reduce the link state database of routers within the stub area.
Format config router ospf area stub create <areaid>
config router ospf area stub delete
This command deletes a stub area for the specified area ID.
Format config router ospf area stub delete <areaid>
config router ospf area delete
This command removes the specified area from the router configuration.
The user is advised to disable OSPF before using this command.
Format config router ospf area delete <areaid>
show router ospf neighbor detailed
This command displays the OSPF neighbor table list. When a particular neighbor ID is specified,
detailed information about a neighbor is given. The information below will only be displayed if
OSPF is enabled and the interface has a neighbor. The IP address is the IP address of the neighbor.
Format show router ospf neighbor detailed
<slot.port> <ipaddr>
Interface Is the slot.port identifying the internal interface number of the
OSPF neighbor.
Router Id Is a 4-digit dotted-decimal number identifying neighbor router.
Options An integer value that indicates the optional OSPF capabilities
supported by the neighbor. The neighbor's optional OSPF capa-
bilities are also listed in its Hello packets. This enables received
Hello Packets to be rejected (i.e., neighbor relationships will not
even start to form) if there is a mismatch in certain crucial OSPF
capabilities.
Router Priority Displays the OSPF priority for the specified interface. The prior-
ity of an interface is a priority integer from 0 to 255. A value of '0'