Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
9-10 CLI Commands: Differentiated Services
config diffserv class match protocol keyword
This command adds to the specified class definition a match condition based on the IP Protocol of
a packet using a single keyword notation. The
<classname> is the name of an existing DiffServ
class. The value for
<protocolkey> is one of the supported protocol name keywords (listed
below). The optional
[exclude] parameter has the effect of negating this match condition for the
class (i.e., match all IP Protocol numbers except for the one specified here).
The currently supported
<protocolkey> values are: icmp, igmp, ip, tcp, udp. Note that a
<protocolkey> value of ip is interpreted to match all protocol number values.
Note: The protocol keyword and number commands are alternative ways to specify an IP protocol
value as a match criterion.
Default none
Format config diffserv class match protocol keyword <class-
name> <protocolkey> [exclude]
config diffserv class match protocol number
This command adds to the specified class definition a match condition based on the value of the IP
Protocol field in a packet using a numeric value notation. The
<classname> is the name of an
existing DiffServ class. The protocol number is a standard value assigned by IANA and is
interpreted as an integer from 0 to 255. The optional
[exclude] parameter has the effect of
negating this match condition for the class (i.e., match all IP Protocol numbers except for the one
specified here).
Note: This command does not validate the protocol number value against the current list defined
by IANA.
Note: The protocol keyword and number commands are alternative ways to specify an IP protocol
value as a match criterion.
Default none
Format config diffserv class match protocol number <class-
name> <0-255> [exclude]