Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
7-16 Switching Commands
Default none
Format config network protocol <none|bootp|dhcp>,
where bootp indicates that the switch periodically sends
requests to a Bootstrap Protocol (BootP) server or a dhcp server
until a response is received. none indicates that the switch
should be manually configured with IP information.
config network webmode
This command enables or disables access to the switch through the Web interface. When access is
enabled, the user can login to the switch from the Web interface. When access is disabled, the user
cannot login to the switch's Web server.
Disabling the Web interface takes effect immediately. All interfaces are effected.
Default enable
Format config network webmode <enable|disable>
config network javamode
This command specifies whether or not the switch should allow access to the Java applet in the
header frame of the Web interface. When access is enabled, the Java applet can be viewed from the
Web interface. When access is disabled, the user cannot view the Java applet.
Default enable
Format config network javamode <enable|disable>
config prompt
This command changes the name of the prompt. The length of name may be up to 64 alphanumeric
characters.
Default <model #>
Format config prompt <system prompt>
show serial
This command displays serial communication settings for the switch.
Format show serial