Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
Switching Commands 7-39
config garp gmrp adminmode
This command enables or disables GARP Multicast Registration Protocol (GMRP) on the system.
The default value is disable.
Format config garp gmrp adminmode <enable/disable>
config garp gmrp interfacemode
This command enables or disables GARP Multicast Registration Protocol on a selected interface.
The <slot.port> parameter identifies the interface on which to configure the mode. If an interface
which has GARP enabled is enabled for routing or is enlisted as a member of a LAG, GARP
functionality will be disabled on that interface. GARP functionality will subsequently be re-
enabled if routing is disabled and LAG membership is removed from an interface that has GARP
enabled.
Default disable
Format config garp gmrp interfacemode <slot.port/all>
<enable/disable>
config garp gvrp adminmode
This command enables or disables GVRP.
Default disable
Format config garp gvrp adminmode <enable|disable>
config garp gvrp interfacemode
This command enables or disables GVRP (GARP VLAN Registration Protocol) for a specific
port. If GVRP is disabled, Join Time, Leave Time and Leave All Time have no effect.
Default disable
Format config garp gvrp interfacemode
<slot.port|all> <enable|disable>