NETGEAR L3 Switch User Manual


 
7000 Series L3 Managed Switch Reference Manual for Software v2.0
Routing Commands 8-7
routing interfaces. It will be displayed above the per-VLAN
information.
VLAN ID Is the identifier of the VLAN.
Logical Interface Indicates the logical slot and port associated with the VLAN rout-
ing interface.
IP Address Displays the IP Address associated with this VLAN.
Subnet Mask Indicates the subnet mask that is associated with this VLAN.
config ip vlan routing create
This command creates routing on a VLAN. The <vlan> value has a range from 1 to 4094.
Format config ip vlan routing create <vlan>
config ip vlan routing delete
This command deletes routing on a VLAN. The <vlan> value has a range from 1 to 4094.
Format config ip vlan-routing delete <vlan>
show router ip interface summary
This command displays summary information about IP configuration settings for all ports in the
router. This command takes no options.
Format show router ip interface summary
Slot.Port The interface being displayed on the row.
IP Address The IP address of the routing interface in 32-bit dotted decimal
format.
IP Mask The IP mask of the routing interface in 32-bit dotted decimal for-
mat.
Netdir Bcast Indicates if IP forwards net-directed broadcasts on this interface.
Possible values are Enable or Disable.
MultiCast Fwd Indicates the multicast forwarding administrative mode on the
interface. Possible values are Enable or Disable.
In Access Mode Indicates the inbound access list checking administrative mode
on this interface. Possible values are Enable or Disable.
Out Access Mode Indicates the outbound access list checking administrative mode
on this interface. Possible values are Enable or Disable.