Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
6-12 Quick Startup
SOLUTION 1
All traffic entering the ports is tagged traffic. Since the traffic is tagged, the PVID configuration
for each port is not a concern.
• The network card configuration for devices on Project A must be set to tag all traffic with
'VLAN 2'
• The network card configuration for devices on Project B must be set to tag all traffic with
'VLAN 3'
• The network card configuration for devices on Project C must be set to tag all traffic with
'VLAN 4'
• The network card configuration for devices on Project P must be set to tag all traffic with
'VLAN 9'
SOLUTION 2
The network card configuration for devices on Project A, B and C should be set to NOT tag traffic.
To take care of these untagged frames configure the following:
• config vlan ports pvid 2 0.1
• config vlan ports pvid 2 0.2
• config vlan ports pvid 3 0.3
• config vlan ports pvid 3 0.4
• config vlan ports pvid 4 0.5
• config vlan ports pvid 4 0.6