Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
7-78 Switching Commands
Default Access to all ports
Format config dot1x port users add <user> <slot.port/all>
config dot1x port users remove
This command removes the specified user from the list of users with access to the specified port.
Format config dot1x port users remove <user> <slot.port/all>
config users defaultlogin
This command assigns the authentication login list to use for non-configured users when
attempting to log in to the system. This setting is overridden by the authentication login list
assigned to a specific user if the user is configured locally. If this value is not configured, users will
be authenticated using local authentication only.
Format config users defaultlogin <listname>
config users login
This command assigns the specified authentication login list to the specified user for system login.
The <user> must be a configured <user> and the <listname> must be a configured login list.
If the user is assigned a login list that requires remote authentication, all access to the interface
from all CLI, web, and telnet sessions will be blocked until the authentication is complete. Refer to
the discussion of maximum delay in the ‘config radius maxretransmit’ and ‘config radius timeout’
commands.
Note that the login list associated with the ‘admin’ user can not be changed to prevent accidental
lockout from the switch.
Format config users login <user> <listname>
show authentication login info
This command displays the ordered authentication methods for all authentication login lists.
Format show authentication login info
Authentication Login List This displays the authentication login listname.
Method 1 This displays the first method in the specified authentication login list, if any.
Method 2 This displays the second method in the specified authentication login list, if any.