Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
Switching Commands 7-85
clear stats switch
This command clears the stats for the switch.
Format clear stats switch
clear igmpsnooping
This command clears the tables managed by the IGMP Snooping function and will attempt to
delete these entries from the Multicast Forwarding Database.
Format clear igmpsnooping
reset system
This command resets the switch without powering it off. Reset means that all network connections
are terminated and the boot code executes. The switch uses the stored configuration to initialize
the switch. You are prompted to confirm that the reset should proceed. A successful reset is
indicated by the LEDs on the switch.
Format reset system
ping
This command checks if another computer is on the network and listens for connections. To use
this command, configure the switch for network (in-band) connection. The source and target
devices must have the ping utility enabled and running on top of TCP/IP. The switch can be pinged
from any IP workstation with which the switch is connected through the default VLAN (VLAN 1),
as long as there is a physical path between the switch and the workstation. The terminal interface
sends, three pings to the target station.
Format ping <ipaddr>