Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
9-34 CLI Commands: Differentiated Services
Policy Name The name of this policy. (Note that the order in which the policies
are displayed is not necessarily the same order in which they were
created.)
Policy Type The policy type, namely whether it is an inbound or outbound
policy definition.
Class Members List of all class names associated with this policy.
show diffserv service info detailed
This command displays policy service information for the specified interface and direction. The
<slot.port> parameter specifies a valid slot number and port number for the system. The
direction parameter indicates the interface direction of interest.
Format show diffserv service info detailed <slot.port> <in/
out>
DiffServ Admin Mode
The current setting of the DiffServ administrative mode. An
attached policy is only in effect on an interface while DiffServ is
in an enabled mode.
Interface The slot number and port number of the interface (slot.port).
Direction The traffic direction of this interface service, either in or out
Operational Status The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated
direction.
Policy Details Attached policy details, whose content is identical to that
described for the show diffserv policy detailed command (content
not repeated here for brevity).
show diffserv service info summary
This command displays all interfaces in the system to which a DiffServ policy has been attached.
The direction parameter is optional; if specified, only services in the indicated direction are shown,
otherwise service information is shown for both directions, where applicable.
Format show diffserv service info summary [in/out]