Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
Routing Commands 8-5
Format config ip interface mtu <slot.port> <576-
1500>
config ip interface netdirbcast
This command enables or disables the forwarding of network-directed broadcasts.
The value for <mode> is either enable or disable. When enabled, network directed broadcasts are
forwarded. When disabled they are dropped.
Default enable.
Format config ip interface netdirbcast <slot.port>
<enable/disable>
config ip interface create
This command configures an IP address on an interface.
The value for <ipaddr> is the IP Address of the interface.
The value for <subnetmask> is a 4-digit dotted-decimal number which represents the Subnet Mask
of the interface. This changes the label "IP address" in "Show IP Interface."
Format config ip interface create <slot.port>
<ipaddr> <subnetmask>
config ip interface delete
This command deletes an IP address from an interface.
The value for <ipaddr> is the IP Address of the interface.
The value for <subnetmask> is a 4-digit dotted-decimal number which represents the Subnet Mask
of the interface.
Format config ip interface delete <slot.port>
<ipaddr> <subnetmask>
show ip summary
This command displays all the summary information of the IP. This command takes no options.