Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
7-34 Switching Commands
Port VLAN ID The VLAN ID that this port will assign to untagged frames or pri-
ority tagged frames received on this port. The value must be for
an existing VLAN. The factory default is 1.
Acceptable Frame Types Specifies the types of frames that may be received on this port.
The options are 'VLAN only' and 'Admit All'. When set to
'VLAN only', untagged frames or priority tagged frames received
on this port are discarded. When set to 'Admit All', untagged
frames or priority tagged frames received on this port are
accepted and assigned the value of the Port VLAN ID for this
port. With either option, VLAN tagged frames are forwarded in
accordance to the 802.1Q VLAN specification.
Ingress Filtering May be enabled or disabled by selecting the corresponding line
on the pull-down entry field. When enabled, the frame is dis-
carded if this port is not a member of the VLAN with which this
frame is associated. In a tagged frame, the VLAN is identified by
the VLAN ID in the tag. In an untagged frame, the VLAN is the
Port VLAN ID specified for the port that received this frame.
When disabled, all frames are forwarded in accordance with the
802.1Q VLAN bridge specification. The factory default is dis-
abled.
GVRP
config vlan port pvid
This command changes the VLAN ID per interface.
Default 1
Format config vlan port pvid <1-4094>
<slot.port|all>
config vlan port acceptframe
This command sets the frame acceptance mode per interface. For VLAN Only mode, untagged
frames or priority frames received on this interface are discarded. For Admit All mode, untagged
frames or priority frames received on this interface are accepted and assigned the value of the
interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in
accordance with the IEEE 802.1Q VLAN Specification. VLAN ID range is 1-4094.
Default Admit All