Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
Routing Commands 8-29
config router route delete
This command causes a static route to be deleted. The <networkaddr> and <nexthopip> are valid
IP address. The <subnetmask> is a 4-digit dotted-decimal number representing a valid Subnet
Mask.
Format config router route delete <networkaddr>
<subnetmask> <nexthopip>
config router route preference
This command sets the route preference value of local and static routes in the router. Lower route
preference values are preferred when determining the best route.
Default Local -- 0; Static -- 60
Format config router route preference <local/
static> <0-255>
config router route default create
This command configures the default route. The value for <nexthopip> is a valid IP address of the
next hop router.
Format config router route default create
<nexthopip>
config router route default delete
This command causes the static default route to be deleted.
Format config router route default delete
show router vrrp info
This command displays whether VRRP functionality is enabled or disabled on the 7000 Series L3
Managed Switch. It also displays some global parameters which are required for monitoring This
command takes no options.
Format show router vrrp info
VRRP Admin Mode Displays the admin mode for VRRP functionality on the switch.