Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
Routing Commands 8-27
show router route table
This command causes the entire route table to be displayed. This commands takes no options.
Format show router route table
Network Address Is an IP address identifying the network on the specified inter-
face.
Subnet Mask Is a mask of the network and host portion of the IP address for the
router interface.
Protocol Tells which protocol added the specified route. The possibilities
are: local, static, OSPF or RIP.
Next Hop Intf The outgoing router interface to use when forwarding traffic to
the next destination.
Next Hop IP Address The outgoing router IP address to use when forwarding traffic to
the next router (if any) in the path toward the destination.
Total Number of Routes The total number of routes.
show router route bestroutes
This command causes the entire route table to be displayed. This commands takes no options.
Format show router route bestroutes
Network Address Is an IP address identifying the network on the specified inter-
face.
Subnet Mask Is a mask of the network and host portion of the IP address for the
specified interface.
Protocol Tells which protocol added the specified route. The possibilities
are: local, static, OSPF or RIP.
Next Hop Intf The outgoing router interface to use when forwarding traffic to
the next destination.
Next Hop IP Address The outgoing router IP address to use when forwarding traffic to
the next router (if any) in the path toward the destination.
Total Number of Routes The total number of routes.
show router route entry
This command displays detailed information about the route to a specific network to be displayed.
The value for <networkaddr> is a valid IP address.