NETGEAR L3 Switch User Manual


 
7000 Series L3 Managed Switch Reference Manual for Software v2.0
6-4 Quick Startup
Uploading from Switch to Out-of-Band PC (Only XMODEM)
Burned in MAC Address - The Burned in MAC Address used for
in-band connectivity
Locally Administered MAC Address - Can be configured to allow
a locally administered MAC address
MAC Address Type - Specifies which MAC address should be
used for in-band connectivity
Network Configurations Protocol Current - Indicates which
network protocol is being used
Default is DHCP
Java Mode - Specifies whether the switch should allow the Java
applet to show the interactive switch graphic (see “Interactive
Switch Image” on page 4-4)
Default is enable
config network parms config network parms <ipAddr> <Mask> <gateway>
IP Address range from 0.0.0.0 to 255.255.255.255
Subnet Mask range from 0.0.0.0 to 255.255.255.255
Gateway Address range from 0.0.0.0 to 255.255.255.255
Table 6-5. Quick Start Up Uploading from Switch to Out-of-Band PC (Only XMODEM)
Command Details
transfer upload mode xmodem Changes mode to xmodem which is initiated by the
serial EIA 232 port
Table 6-4. Quick Start Up IP Address
Command Details