Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
8-20 Routing Commands
show router rip info
This command displays information relevant to the RIP router.
Format show router rip info
Router ID Is a 32 bit dotted decimal number representing the interface.
RIP Admin Mode RIP administrative mode of router RIP operation; enable acti-
vates and disable de-activates the RIP ability for the switch. This
is a configured value.
Global Route Changes The number of route changes made by RIP to the IP Route Data-
base.
Global queries The number of responses sent to RIP queries from other systems.
show router rip interface detailed
This command displays information related to a particular RIP interface.
Format show router rip interface detailed
<slot.port>
Interface Is the unit slot.port identifying each interface. This is a config-
ured value.
IP Address The IP source address used by the specified RIP interface. This is
a configured value.
Send version The RIP version(s) used when sending updates on the specified
interface. The types are none, RIP-1, RIP-1c, RIP-2. This is a
configured value.
Receive version The RIP version(s) allowed when receiving updates from the
specified interface. The types are none, RIP-1, RIP-2, Both. This
is a configured value.
RIP Admin Mode RIP administrative mode of router RIP operation; enable acti-
vates, disable de-activates it. This is a configured value.
Link State Indicates whether the RIP interface is up or down. This is a con-
figured value.
Authentication Type The RIP Authentication Type for the specified interface. The
types are none and simple. This is a configured value.
Authentication Key The RIP Authentication Key for the specified interface. The
actual key will be **** to avoid compromising privacy. This is a
configured value.