Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
7-2 Switching Commands
Machine Type Specifies the machine model as defined by the Vital Product
Data.
Burnedin MAC Address Universally assigned network address.
Software Version The release.version.revision number of the code currently run-
ning on the switch.
show sysinfo
This command displays switch information.
Format show sysinfo
Switch Description Text used to identify this switch.
System Name Name used to identify the switch.
System Location Text used to identify the location of the switch. May be up to 31
alpha-numeric characters. The factory default is blank.
System Contact Text used to identify a contact person for this switch. May be up
to 31 alpha-numeric characters. The factory default is blank.
System ObjectID The base object ID for the switch’s enterprise MIB.
IP Address The IP address currently assigned to the switch.
System Up Time The time in days, hours and minutes since the last switch reboot.
MIBs Supported A list of MIBs supported by this agent.
config sysname
This command sets the name assigned to the switch.The range for name is from 1 to 31
alphanumeric characters.
Default Blank
Format config sysname <name>
config syslocation
This command sets the physical location of the switch. The range for name is from 1 to 31
alphanumeric characters.
Default Blank
Format config syslocation <location>