Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
Switching Commands 7-83
Note: This command is valid only when the Transfer Mode is TFTP. See “transfer download
mode” on page 82. Details of the TFTP path are explained under the command
transfer upload
path <path>.
Default
Blank
Format transfer download path <path>
transfer download filename
This command sets the name for the file that is downloaded to the switch. The switch
“remembers” the last file name used.
Append the file path to the file name if the string is less than 31 characters. Otherwise, use the
transfer download path command, and the File Name will be appended to the File Path as is.
Note: This command is valid only when the Transfer Mode is TFTP. See “transfer download
mode” on page 82.
Default Blank
Format transfer download filename <name>
transfer download datatype
This command sets the type of file to download to the switch.
Default code
Format transfer download datatype <code|config>
transfer download start
This command starts a download transfer after displaying current settings and upon confirmation.
Format transfer download start
clear transfer
This command resets the file transfer configured values to the factory defaults.
Format clear transfer