Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
CLI Commands: Differentiated Services 9-29
Format config diffserv service remove <in/out> <slot.port/
all> <policyname>
Show Commands
The 'show' command set is used in DiffServ to display configuration and status information for:
• Classes
• Policies
•Services
This information can be displayed in either summary or detailed formats. The status information is
only shown when the DiffServ administrative mode is enabled; it is suppressed otherwise.
There is also a 'show' command for general DiffServ information that is available at any time.
The CLI command root is
show diffserv.
show diffserv class detailed
This command displays all configuration information for the specified class. The <classname> is
the name of an existing DiffServ class.
Format show diffserv class detailed <classname>
Class Name The name of this class.
Class Type The class type (all, any, or acl) indicating how the match criteria
are evaluated for this class. A class type of all means every match
criterion defined for the class is evaluated simultaneously they
must all be true to indicate a class match. For a type of any each
match criterion is evaluated sequentially and only one need be
true to indicate a class match. Class type acl rules are evaluated in
a hybrid manner, with those derived from each ACL Rule
grouped and evaluated simultaneously, while each such grouping
is evaluated sequentially.
Match Criteria The Match Criteria fields will only be displayed if they have been
configured. They will be displayed in the order entered by the
user. These are evaluated in accordance with the class type. The
possible Match Criteria fields are: Class of Service, Destination