Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
CLI Commands: Differentiated Services 9-35
DiffServ Mode The current setting of the DiffServ administrative mode. An
attached policy is only active on an interface while DiffServ is in
an enabled mode.
The following information is repeated for interface and direction (only those interfaces configured
with an attached policy are shown):
Interface The slot number and port number of the interface (slot.port).
Direction The traffic direction of this interface service, either in or out
OperStatus The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated
direction.
show diffserv service stats detailed
This command displays policy-oriented statistics information for the specified interface and
direction. The
<slot.port> parameter specifies a valid slot number and port number for the
system. The direction parameter indicates the interface direction of interest.
Note: This command is only allowed while the DiffServ administrative mode is enabled.
Format show diffserv service stats detailed <slot.port> [in/
out]
Interface
The slot number and port number of the interface (slot.port).
Direction The traffic direction of this interface service, either in or out. If
the [in/out] optional parameter is not specified, statistics are
shown for both directions (if available).
Operational Status The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated
direction.
Interface Offered Octets/Packets A cumulative count of the octets/packets offered to this ser-
vice interface in the specified direction before the defined Diff-
Serv treatment is applied.
Interface Discarded Octets/Packets A cumulative count of the octets/packets discarded by this
service interface in the specified direction for any reason due to
DiffServ treatment.