Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
Switching Commands 7-13
show stats switch summary
This command displays a count of all CPU traffic.
Format show stats switch summary
Packets Received
Without Error
The total number of packets (including broadcast packets and
multicast packets) received by the processor.
Broadcast Packets
Received
The total number of packets received that were directed to the
broadcast address. Note that this does not include multicast pack-
ets.
Packets Received
With Error The number of inbound packets that contained errors preventing
them from being deliverable to a higher-layer protocol.
Packets Transmitted
Without Error
The total number of packets transmitted out of the interface.
Broadcast Packets
Transmitted
The total number of packets that higher-level protocols requested
to be transmitted to the Broadcast address, including those that
were discarded or not sent.
Transmit Packet Errors The number of outbound packets that could not be transmitted
because of errors.
Address Entries
Currently In Use
The total number of Forwarding Database Address Table entries
now active on the switch, including learned and static entries.
VLAN Entries
Currently In Use The number of VLAN entries presently occupying the VLAN
table.
Time Since Counters
Last Cleared
The elapsed time, in days, hours, minutes, and seconds since the
statistics for this switch were last cleared.
show eventlog
This command displays the event log, which contains error messages from the system. The event
log is not cleared on a system reset.
Format show eventlog
File The file in which the event originated.
Line The line number of the event