Filter
Top Products
7000 Series L3 Managed Switch Reference Manual for Software v2.0
Routing Commands 8-31
VRID Represents the router ID of the virtual router.
IP Address Is the IP Address that was configured on the virtual router
Mode Represents whether the virtual router is enabled or disabled.
State Represents the state (Master/backup) of the virtual router.
show router vrrp interface stats
This command displays the statistical information about each virtual router configured on the 7000
Series L3 Managed Switch.
Format show router vrrp interface stats <slot.port> <vrID>
UpTime Is the time that the virtual router has been up, in days, hours, min-
utes and seconds.
State Transitioned to Master Represents the total number of times virtual router state has
changed to MASTER.
Advertisement Received Represents the total number of VRRP advertisements received by
this virtual router.
Advertisement
Interval Errors Represents the total number of VRRP advertisements received
for which advertisement interval is different than the configured
value for this virtual router.
Authentication Failure Represents the total number of VRRP packets received that don't
pass the authentication check.
IP TTL errors Represents the total number of VRRP packets received by the vir-
tual router with IP TTL (time to live) not equal to 255.
Zero Priority
Packets Received
Represents the total number of VRRP packets received by virtual
router with a priority of '0'.
Zero Priority Packets Sent Represents the total number of VRRP packets sent by the virtual
router with a priority of '0'
Invalid Type
Packets Received
Represents the total number of VRRP packets received by the vir-
tual router with invalid 'type' field.
Address List Errors Represents the total number of VRRP packets received for which
address list does not match the locally configured list for the vir-
tual router.
Invalid Authentication Type Represents the total number of VRRP packets received with
unknown authentication type.