Filter
Top Products
Pacific Research Solutions RI-300e User Manual
Page 8
Trig
gers
This menu is used to set up messages, various internal event triggers and the scheduler.
Telep
hone
This menu is used to set up the telephone operation, access/account codes, auto dial numbers and toll restriction.
H
elp
Use this menu to get help on any of the programming software items.
MACRO EDITING MENU
You can edit the macros associated
with commands by clicking the
“Edit Macro” button in any of the
user command menus. In the “Edit
Macro Data” sub window, you can
pick various macro lines and
display the decoded macro data.
You can also pick the “Macro
Source” tab to display all user
commands, event triggers, calls and
jumps that reference that macro.
When editing the macro data, you
can right click the “Edit System
Commands” box to get a System
Command from a list. You can
also right click the “Line No” box
to get a view of the macro data
when looking for an empty line to
build your macro. On the left side
of the macro decode window, you
can drag and drop any System
Command to change the order of
the System Commands in the
macro. Finally, you can add a
description to your macro. It should
be noted that the description data is
only saved to the .rdf file only and
not saved to the controller.
The structure and syntax used to
build any macro or message is the
same structure you would use over
the air with DTMF. Just as in
building a macro over the air, you
must include a “64” at the end of all
macros to terminate the macro.
Similar to building a macro over the
air, the software will keep track of
the total number of digits and lines
used in a macro. Various errors are
also displayed in this window.