Filter
Top Products
Setting the PS Printer Driver (Mac OS X 10.1 - Mac OS X 10.2)
Macintosh
MacintoshWindows
Basics
98
Mac OS X intensively manages adding, deleting, searching a printer or displaying the printer
status, etc. with the application Print Center.
Before you can use a printer, you must add the printer in the Print Center.
You will need to select the Page Setup window from your application’s file menu to set general
printing options for your printer.
Additional print options can then be specified from your application’s Print selecting window.
NOTE
• The Print Center is in the Utilities folder (Macintosh HD:Applications:Utilities).
• Screen shots in Mac OS X 10.1 are used in this Operating Instructions. Menus may be
different depending on the version of Mac OS X.
Be sure the printer is connected to the network and turned it on.
1 Open the Print Center and choose Add Printer... from the Printers
menu.
2 Choose AppleTalk as the connection type, and click KX-P7310-
XXXXXX.
KX-P7310-XXXXXX is displayed in the Printer List.
(XXXXXX: last 3 bytes of the MAC Address)
3 Confirm the Printer Model is set to Auto Select... and click Add.
4 Close the Print Center.
Setting the PS Printer Driver
(Mac OS X 10.1 - Mac OS X 10.2)
Adding the KX-P7310 in Print Center Connected with
AppleTalk