Filter
Top Products
Cautions
MacintoshWindows
Basics
Basics
4
■ Static Electricity Damage
To prevent static electricity damage to any of the following components, touch a grounded
metal surface, such as the printer’s bare metal frame prior to touching the component.
• Interface connectors : parallel, USB, connector for 2nd feeder and network (KX-P7310
only)
• Electrical components, connectors inside the printer
■ Interface Cable
Always use a shielded interface cable. Use of an unshielded cable can result in radio
interference with data.
■ Power Source
Do not use a line conditioner, transient suppressor or surge protector, it may cause a
printer error.
■ Ventilation Space
Adequate ventilation space is required between the printer and any walls,
20 mm (8 inches) is recommended.